Design, Development, Manufacturers & Exporters of
1. Electrical Control Panel & MV Panel
2. Switch boards & Distribution Board
3. Motor Control Centre & Power Control Centre
We have tested our panels in CPRI as per the following standards:
1. Short circuit test as per Sub-clause 8.2.3 of IS 8623 (Part 1): 1993/IEC
2. IP55 tests (IP5x Catagory-2) as per IS-IEC 60947-1: 2004 standards
Turn key Electrical contractor with "Super A" grade license (ESA-182)
Transformer oil filtration by advance stream line process (Both Distribution & Power transformer up to 230KV)
Transformer Rewinding, Servicing & arresting of oil leakage.
Testing of HT & LT Breakers, Relays etc.
Fire pump control pump designed to operate on emergency conditions receiving signals from fire pipe lines through pressure operative switches activating motor control devices (Jockey pump, Main pump) also activate Diesel engine, fire pump automatically.
A well designed passive harmonic filter with automatic power factor correction panel to suppress the harmonics to the desired safe limit.
Variable frequency drive control panel (also named VFD panel, AC drive electrical control panel) consists of inner VFD inside the cabinet with external control, protection, external display and it’s a frequency conversion device to control three phase AC motor (including fans and pumps) in variable speed to save energy
Electrical designer & a Turnkey Electrical Contractor.
* Approved by CEIG / Electrical Inspector confirming to IE rules.
We design the Automatic Power Factor Correction APFC panel based on the existing power factor corrections in the specified locations. The panels are custom built & the power factor is corrected to achieve close to unity. This brings down the maximum demand & avoids penalty for poor power factor conditions at the site.
The panel will maintain the power factor of the system automatically by switching the capacitor bank as per the needs of the system. It also maintains the desired power factor through the Automatic power factor control relay.
The passive Harmonic Filter panel concept uses power electronics to introduce current components,which cancel the harmonic components of the non-linear loads.We can manufacture panels of varying capacities,ratings and filters for the loads to be compensated.
Our Electrical Metering Panel Boards are designed with careful wiring and are excellent in appearance. These metering panel boards are made of cold rolled ,mild steel metal clad, free standing, totally enclosed ,cubical type, fully compartmentalized, ideal for indoor/outdoor installations.
